IBM RS64

This article includes a list of general references but lacks sufficient corresponding inline citations. Please help improve this article by introducing more precise citations. (March 2014) (Learn how and when to remove this message)

The IBM RS64 is a family of microprocessors introduced by IBM in the mid 1990s, and used in the RS/6000 and AS/400 servers.

These microprocessors implement the "Amazon", or "PowerPC-AS", instruction set architecture (ISA). Amazon is a superset of the PowerPC instruction set, with the addition of special features not in the PowerPC specification, mainly derived from POWER2^{[citation needed]} and the original AS/400 processor, and has been 64-bit from the start. The processors in this family are optimized for commercial workloads (integer performance, large caches, frequent branches) and do not feature the strong floating point performance of the processors in the POWER family, its sibling.

The RS64 family was phased out soon after the introduction of the POWER4, which was developed to unite the RS64 and POWER families.

History

In 1990, the AS/400 engineering team at IBM Rochester began work on a new architecture known as C-RISC (Commercial RISC) to replace the IMPI architecture of the AS/400.^[1][2] C-RISC was an evolution of the IMPI instruction set, extending the address space to 96 bits and adding some RISC instructions to speed up the more computationally intensive commercial applications that were being created for AS/400s. IBM president Jack Kuehler wanted the AS/400 team to use PowerPC, but they resisted, arguing that the existing 32/64-bit PowerPC instruction set would not enable a viable transition for OS/400 software and that the existing instruction set required extensions for the commercial applications on the AS/400. At Kuehler's insistence, a team at Rochester led by Frank Soltis investigated the feasibility of extending the PowerPC instruction set to support the needs of the AS/400 platform. These extensions became known as Amazon and were selected by IBM executive management for further development over continued development of C-RISC.^[3]

At the same time, the RS/6000 developers were broadly expanding their product line to include systems which spanned from low-end workstations, to mainframe-competitor large enterprise SMP systems, to clustered IBM RS/6000 SP supercomputing systems. PowerPC processors developed in the AIM alliance suited the low-end RISC workstation and small server space well. But mainframe and large clustered supercomputing systems required more performance and reliability, availability and serviceability features than processors designed for Apple Power Macs. Multiple processor designs were required to simultaneously meet the requirements of the cost-focused Apple Power Mac, high-performance and RAS RS/6000 systems, and the AS/400 transition to PowerPC.

Amazon was extended to support those features as well, so that processors could be designed for use in both high-end RS/6000 and AS/400 machines.

The project to develop the first such processor was "Bellatrix" (the name of a star in the Orion constellation, also called the "Amazon Star"). The Bellatrix project was extremely ambitious in its pervasive use of self-timed & pulse-based circuits and the EDA tools required to support this design strategy, and was eventually terminated. To address technical workstation, supercomputer, and engineering/scientific markets, IBM Austin (the home of the RS/6000s) then started developing a time-to-market single-chip version of the Power2 (P2SC) in parallel with the development of a sophisticated 64-bit PowerPC processor with the POWER2 extensions and twin sophisticated MAF floating-point units (the POWER3/630). To address RS/6000 commercial applications and AS/400 systems, IBM Rochester (the home of the AS/400s) started developing the first of the high-end 64-bit PowerPC processors with AS/400 extensions, and IBM Endicott started developing a low-end single-chip PowerPC processor with AS/400 extensions.

Cobra and Muskie

In 1995, IBM released the Cobra, or A10 processor, the first full implementation of PowerPC AS, for the IBM AS/400 systems. It was a single-chip processor running at 50-77 MHz. It was designed with a semi-custom methodology, as a consequence of time-to-market constraints. The die contains 4.7 million transistors and measures 14.6 mm by 14.6 mm (213 mm²). It was fabricated by IBM in their CMOS 5L process, a 0.5 μm, four-layer-metal CMOS process. It used a 3.0 V power supply and dissipated 17.7 W maximum, 13.4 W minimum at 77 MHz. It was packaged in a 625-contact ceramic ball grid array (CBGA) that measured 32 mm by 32 mm.

Cobra was preceded by a simplified implementation known as Cobra-Lite in 1994, which was used in the first IBM Advanced/36 systems.^[1] It lacked 17 instructions from the full PowerPC AS ISA which were not needed for the Advanced/36.

In 1996, IBM released the high-end, 4-way SMP, multi-chip version called Muskie, A25 or A30 in AS/400 systems. It ran at 125-154 MHz. It was manufactured on a BiCMOS fabrication process.

These processors were only used in AS/400 and Advanced/36 machines.

RS64

The RS64 or Apache was introduced in 1997. It was developed from "Cobra" and "Muskie" but included a more complete PowerPC ISA and was therefore set to be used in RS/6000 machines as well as in AS/400 systems. It featured 128 KB total on-die L1 cache, 4 MB full speed off-chip L2 on a 128-bit bus, and a clock of 125 MHz. It scaled to a 12-processor SMP configuration in IBM's machines.

RS64 was called A35 in AS/400 and was one time referred to as the PowerPC 625, between the defunct PowerPC 620 and the PowerPC 630 (later renamed POWER3).

It was manufactured with a BiCMOS fabrication process.

RS64-II

The RS64-II or Northstar was introduced at 262 MHz in 1998 with 8 MB of full speed L2 on a 256 bit 6XX bus (also used in PowerPC 620 and POWER3). Processor boards containing 4 RS64-II's could be swapped into machines designed for similar 4-way RS64 boards, avoiding a "fork lift upgrade". The RS64-II contained 12.5 million transistors, was 162 mm² large and drew 27 watts maximum power. Manufacturing changed to a 0.35 μm CMOS fabrication.

RS64-II was the first mass-market processor to implement multithreading. Essentially, each chip stores state information for 2 threads at any given time and appears to be two processors to the OS. One logical processor runs what is called the foreground thread. When this thread encounters a high-latency event (L2 cache miss, etc.) the background thread is switched to, on the second logical processor from the OS's point of view. In the event of a "less long" latency event (L1 miss, etc.), thread switching will only occur if the background thread is ready to execute. If the background thread is also waiting for a miss, thread switching will not occur. IBM calls this scheme "coarse grained multithreading". It is not exactly the same thing as simultaneous multithreading as found on later Pentium 4 processors. An IBM paper notes that the coarse grained scheme is a better fit for an in-order microarchitecture like RS64.

RS64-II was called A50 in AS/400 systems.

RS64-III

The RS64-III or Pulsar was introduced in 1999 at 450 MHz. Key changes included larger 128 KiB L1 instruction and data caches, improved branch prediction accuracy and reduced branch misprediction penalties of zero or one cycle. The RS64-III has a five-stage pipeline and a 256-bit wide L2 cache bus, which provided the processor with 14.4 GB/s of bandwidth from the 8 MiB L2 cache, implemented with 225 MHz DDR SRAMs.

The RS64-III has 34 million transistors, a die size of 140 mm², and is manufactured on the 0.22 μm CMOS 7S process with six levels of copper interconnect.

In 2000, IBM launched a refined version called IStar manufactured with a SOI fabrication process with copper interconnects, which increased the processor's clock frequency to 600 MHz. This was the first processor implemented in this process. Architecturally however, the IStar was identical to Pulsar.

RS64-IV

The RS64-IV or Sstar was introduced in 2000 at 600 MHz, later increased to 750 MHz. Up to 16 MB DDR L2 cache was supported in the same manner as the RS64-III (19.2 GB/s bandwidth). The RS64-IV had 44 million transistors and was 128 mm² large manufactured on a 0.18 μm process. Unlike POWER, energy consumption remained low, at under 15 watts per core.

For a time, while the POWER line stagnated at half the clock speed of its competitors, the RS64 family was at the top of the IBM large SMP UNIX server line. The integer / commercial workload performance of the RS-64 IV was similar to the Sun Microsystems processors with which it competed, though its floating point power was not comparable to the contemporary POWER3-II, which remained reasonably competitive throughout its lifecycle.

References

Further reading

• Gwennap, Linley (31 July 1995). "IBM Creates PowerPC Processors for AS/400". Microprocessor Report.

External links

• IBM paper on RS64-IV
• 27 years of IBM RISC
• When Is PowerPC Not PowerPC? - History of the POWER Architecture by Frank Soltis
• POWER to the people
• 4th Generation 64-bit PowerPC-Compatible Commercial Processor Design Archived 2009-05-30 at the Wayback Machine
• Inside the PowerPC AS Archived 2013-08-31 at the Wayback Machine