Revised simplex method | Kaynak | OpenTuwa

In mathematical optimization, the revised simplex method is a variant of George Dantzig's simplex method for linear programming.

The revised simplex method is mathematically equivalent to the standard simplex method but differs in implementation. Instead of maintaining a tableau which explicitly represents the constraints adjusted to a set of basic variables, it maintains a representation of a basis of the matrix representing the constraints. The matrix-oriented approach allows for greater computational efficiency by enabling sparse matrix operations.^[1]

Problem formulation

For the rest of the discussion, it is assumed that a linear programming problem has been converted into the following standard form:

{\begin{array}{rl}{\text{minimize}}&{\boldsymbol {c}}^{\mathrm {T} }{\boldsymbol {x}}\\{\text{subject to}}&{\boldsymbol {Ax}}={\boldsymbol {b}},{\boldsymbol {x}}\geq {\boldsymbol {0}}\end{array}}

where $A \in ℝ m \times n$ . Without loss of generality, it is assumed that the constraint matrix $A$ has full row rank and that the problem is feasible, i.e., there is at least one $x \geq 0$ such that $Ax = b$ . If $A$ is rank-deficient, either there are redundant constraints, or the problem is infeasible. Both situations can be handled by a presolve step.

Algorithmic description

Optimality conditions

For linear programming, the Karush–Kuhn–Tucker conditions are both necessary and sufficient for optimality. The KKT conditions of a linear programming problem in the standard form is

{\begin{aligned}{\boldsymbol {Ax}}&={\boldsymbol {b}},\\{\boldsymbol {A}}^{\mathrm {T} }{\boldsymbol {\lambda }}+{\boldsymbol {s}}&={\boldsymbol {c}},\\{\boldsymbol {x}}&\geq {\boldsymbol {0}},\\{\boldsymbol {s}}&\geq {\boldsymbol {0}},\\{\boldsymbol {s}}^{\mathrm {T} }{\boldsymbol {x}}&=0\end{aligned}}

where $λ$ and $s$ are the Lagrange multipliers associated with the constraints $Ax = b$ and $x \geq 0$ , respectively.^[2] The last condition, which is equivalent to $s i x i = 0$ for all $1 < i < n$ , is called the complementary slackness condition.

By what is sometimes known as the fundamental theorem of linear programming, a vertex $x$ of the feasible polytope can be identified by being a basis $B$ of $A$ chosen from the latter's columns.^[a] Since $A$ has full rank, $B$ is nonsingular. Without loss of generality, assume that $A = [B N]$ . Then $x$ is given by

{\boldsymbol {x}}={\begin{bmatrix}{\boldsymbol {x_{B}}}\\{\boldsymbol {x_{N}}}\end{bmatrix}}={\begin{bmatrix}{\boldsymbol {B}}^{-1}{\boldsymbol {b}}\\{\boldsymbol {0}}\end{bmatrix}}

where $x B \geq 0$ . Partition $c$ and $s$ accordingly into

{\begin{aligned}{\boldsymbol {c}}&={\begin{bmatrix}{\boldsymbol {c_{B}}}\\{\boldsymbol {c_{N}}}\end{bmatrix}},\\{\boldsymbol {s}}&={\begin{bmatrix}{\boldsymbol {s_{B}}}\\{\boldsymbol {s_{N}}}\end{bmatrix}}.\end{aligned}}

To satisfy the complementary slackness condition, let $s B = 0$ . It follows that

{\begin{aligned}{\boldsymbol {B}}^{\mathrm {T} }{\boldsymbol {\lambda }}&={\boldsymbol {c_{B}}},\\{\boldsymbol {N}}^{\mathrm {T} }{\boldsymbol {\lambda }}+{\boldsymbol {s_{N}}}&={\boldsymbol {c_{N}}},\end{aligned}}

which implies that

{\begin{aligned}{\boldsymbol {\lambda }}&=({\boldsymbol {B}}^{\mathrm {T} })^{-1}{\boldsymbol {c_{B}}},\\{\boldsymbol {s_{N}}}&={\boldsymbol {c_{N}}}-{\boldsymbol {N}}^{\mathrm {T} }{\boldsymbol {\lambda }}.\end{aligned}}

If $s N \geq 0$ at this point, the KKT conditions are satisfied, and thus $x$ is optimal.

Pivot operation

If the KKT conditions are violated, a pivot operation consisting of introducing a column of $N$ into the basis at the expense of an existing column in $B$ is performed. In the absence of degeneracy, a pivot operation always results in a strict decrease in $c T x$ . Therefore, if the problem is bounded, the revised simplex method must terminate at an optimal vertex after repeated pivot operations because there are only a finite number of vertices.^[4]

Select an index $m < q \leq n$ such that $s q < 0$ as the entering index. The corresponding column of $A$ , $A q$ , will be moved into the basis, and $x q$ will be allowed to increase from zero. It can be shown that

{\frac {\partial ({\boldsymbol {c}}^{\mathrm {T} }{\boldsymbol {x}})}{\partial x_{q}}}=s_{q},

i.e., every unit increase in $x q$ results in a decrease by $- s q$ in $c T x$ .^[5] Since

{\boldsymbol {Bx_{B}}}+{\boldsymbol {A}}_{q}x_{q}={\boldsymbol {b}},

$x B$ must be correspondingly decreased by $Δ x B = B -1 A q x q$ subject to $x B - Δ x B \geq 0$ . Let $d = B -1 A q$ . If $d \leq 0$ , no matter how much $x q$ is increased, $x B - Δ x B$ will stay nonnegative. Hence, $c T x$ can be arbitrarily decreased, and thus the problem is unbounded. Otherwise, select an index $p = argmin 1\leq i \leq m {x i / d i | d i > 0}$ as the leaving index. This choice effectively increases $x q$ from zero until $x p$ is reduced to zero while maintaining feasibility. The pivot operation concludes with replacing $A p$ with $A q$ in the basis.

Numerical example

Consider a linear program where

{\begin{aligned}{\boldsymbol {c}}&={\begin{bmatrix}-2&-3&-4&0&0\end{bmatrix}}^{\mathrm {T} },\\{\boldsymbol {A}}&={\begin{bmatrix}3&2&1&1&0\\2&5&3&0&1\end{bmatrix}},\\{\boldsymbol {b}}&={\begin{bmatrix}10\\15\end{bmatrix}}.\end{aligned}}

Let

{\begin{aligned}{\boldsymbol {B}}&={\begin{bmatrix}{\boldsymbol {A}}_{4}&{\boldsymbol {A}}_{5}\end{bmatrix}},\\{\boldsymbol {N}}&={\begin{bmatrix}{\boldsymbol {A}}_{1}&{\boldsymbol {A}}_{2}&{\boldsymbol {A}}_{3}\end{bmatrix}}\end{aligned}}

initially, which corresponds to a feasible vertex $x = [0 0 0 10 15] T$ . At this moment,

{\begin{aligned}{\boldsymbol {\lambda }}&={\begin{bmatrix}0&0\end{bmatrix}}^{\mathrm {T} },\\{\boldsymbol {s_{N}}}&={\begin{bmatrix}-2&-3&-4\end{bmatrix}}^{\mathrm {T} }.\end{aligned}}

Choose $q = 3$ as the entering index. Then $d = [1 3] T$ , which means a unit increase in $x 3$ results in $x 4$ and $x 5$ being decreased by $1$ and $3$ , respectively. Therefore, $x 3$ is increased to $5$ , at which point $x 5$ is reduced to zero, and $p = 5$ becomes the leaving index.

After the pivot operation,

{\begin{aligned}{\boldsymbol {B}}&={\begin{bmatrix}{\boldsymbol {A}}_{3}&{\boldsymbol {A}}_{4}\end{bmatrix}},\\{\boldsymbol {N}}&={\begin{bmatrix}{\boldsymbol {A}}_{1}&{\boldsymbol {A}}_{2}&{\boldsymbol {A}}_{5}\end{bmatrix}}.\end{aligned}}

Correspondingly,

{\begin{aligned}{\boldsymbol {x}}&={\begin{bmatrix}0&0&5&5&0\end{bmatrix}}^{\mathrm {T} },\\{\boldsymbol {\lambda }}&={\begin{bmatrix}0&-4/3\end{bmatrix}}^{\mathrm {T} },\\{\boldsymbol {s_{N}}}&={\begin{bmatrix}2/3&11/3&4/3\end{bmatrix}}^{\mathrm {T} }.\end{aligned}}

A positive $s N$ indicates that $x$ is now optimal.

Practical issues

Degeneracy

Because the revised simplex method is mathematically equivalent to the simplex method, it also suffers from degeneracy, where a pivot operation does not result in a decrease in $c T x$ , and a chain of pivot operations causes the basis to cycle. A perturbation or lexicographic strategy can be used to prevent cycling and guarantee termination.^[6]

Basis representation

Two types of linear systems involving $B$ are present in the revised simplex method:

{\begin{aligned}{\boldsymbol {Bz}}&={\boldsymbol {y}},\\{\boldsymbol {B}}^{\mathrm {T} }{\boldsymbol {z}}&={\boldsymbol {y}}.\end{aligned}}

Instead of refactorizing $B$ , usually an LU factorization is directly updated after each pivot operation, for which purpose there exist several strategies such as the Forrest−Tomlin and Bartels−Golub methods. However, the amount of data representing the updates as well as numerical errors builds up over time and makes periodic refactorization necessary.^[1]^[7]

Notes and references

Notes

↑ The same theorem also states that the feasible polytope has at least one vertex and that there is at least one vertex which is optimal.^[3]

References

1 2 Morgan 1997, §2.
↑ Nocedal & Wright 2006, p. 358, Eq. 13.4.
↑ Nocedal & Wright 2006, p. 363, Theorem 13.2.
↑ Nocedal & Wright 2006, p. 370, Theorem 13.4.
↑ Nocedal & Wright 2006, p. 369, Eq. 13.24.
↑ Nocedal & Wright 2006, p. 381, §13.5.
↑ Nocedal & Wright 2006, p. 372, §13.4.

Bibliography

Morgan, S. S. (1997). A Comparison of Simplex Method Algorithms (MSc thesis). University of Florida. Archived from the original on 7 August 2011.
Nocedal, J.; Wright, S. J. (2006). Mikosch, T. V.; Resnick, S. I.; Robinson, S. M. (eds.). Numerical Optimization. Springer Series in Operations Research and Financial Engineering (2nd ed.). New York, NY, USA: Springer. ISBN 978-0-387-30303-1.

Optimization: Algorithms, methods, and heuristics

Unconstrained nonlinear

Functions

Gradients

Convergence	Trust region Wolfe conditions
Quasi–Newton	Berndt–Hall–Hall–Hausman Broyden–Fletcher–Goldfarb–Shanno and L-BFGS Davidon–Fletcher–Powell Symmetric rank-one (SR1)
Other methods	Conjugate gradient Gauss–Newton Gradient Mirror Levenberg–Marquardt Powell's dog leg method Truncated Newton

Hessians

Newton's method

Constrained nonlinear

General	Barrier methods Penalty methods
Differentiable	Augmented Lagrangian methods Sequential quadratic programming Successive linear programming

Convex optimization

Convex
minimization

Linear and
quadratic

Interior point	Affine scaling Ellipsoid algorithm of Khachiyan Projective algorithm of Karmarkar
Basis-exchange	Simplex algorithm of Dantzig Revised simplex algorithm Criss-cross algorithm Principal pivoting algorithm of Lemke Active-set method

Combinatorial

Paradigms

Graph
algorithms

Minimum spanning tree	Borůvka Prim Kruskal

Shortest path	Bellman–Ford SPFA Dijkstra Floyd–Warshall

Network flows

Metaheuristics
Evolutionary algorithm Hill climbing Local search Parallel metaheuristics Simulated annealing Spiral optimization algorithm Tabu search

Software

v t e Complementarity problems and algorithms
Complementarity Problems	Linear programming (LP) Quadratic programming (QP) Linear complementarity problem (LCP) Mixed linear (MLCP) Mixed (MCP) Nonlinear (NCP)
Basis-exchange algorithms	Simplex (Dantzig) Revised simplex Criss-cross Lemke